Product Code: C0401


Product Information


  • Internal & External Circlips
  • Assortment Box
  • Qty: 300 Pieces

Internal box assortment pieces as follows:

External ClipsInternal Clips
20 x 6mm15 x 11mm
20 x 8mm15 x 13mm
20 x 9mm15 x 14mm
20 x 11mm15 x 16mm
20 x 13mm15 x 19mm
20 x 14mm15 x 20mm
20 x 16mm
20 x 19mm

15 x 20mm

15 x 22mm

15 x 25mm

15 x 32mm

Circlips are circular shaped clips made out of semi-flexible metal. They are generally used to keep components fitted on shafts or housings and with bearings used for mechanisms that twist, spin, turn or pivot. They are also sometimes referred to as retaining rings or snap rings. 


Circlips tend to have open ends rather than making a complete circle. The open ended design gives the circlips a spring pressure effect. Once fitted in place, the spring effect ensures that they do not move or slip.Many circlips have a small hole at either end. This allows for the installation or removal of the circlip pliers. Normally, specialised circlip pliers are used for this. They have specific sized tips that fit into the small holes within the circlip.


E type circlips, or E-Clips are also very popular. They do not require installation with specialised circlip pliers and are mounted radially, rather than axially. They are easy to remove and install.

Internal and External circlips

Depending on the application, you will require either an internal or external circlip:

  • Internal circlips are fitted within a cylindrical bore, groove or housing and exert pressure outwards.
  • External circlips work in the opposite direction. They exert pressure inwards and normally fit around the outside of a cylinder or shaft.

Write a review

Please login or register to review